192 IO Guide.pdf

of 36
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Articles & News Stories

Published:

Views: 13 | Pages: 36

Extension: PDF | Download: 0

Share
Description
Download 192 IO Guide.pdf
Transcript
  192 I/O ™    Legal Notices This guide is copyrighted ©2007 by Digidesign, a division of Avid Technology, Inc. (hereafter “Digidesign”), with all rights reserved. Under copyright laws, this guide may not be duplicated in whole or in part without the written consent of Digidesign.003, 003Rack, 96 I/O, 96i I/O, 192 Digital I/O, 192 I/O, 888|24 I/O, 882|20 I/O, 1622 I/O, 24-Bit ADAT Bridge I/O, AudioSuite, Avid, Avid DNA, Avid Mojo, Avid Unity, Avid Unity ISIS, Avid Unity MediaNetwork, Avid Xpress, AVoption, AVoption|V10, Beat Detective, Bruno, Command|8, Control|24, D-Command, D-Control, D-Fi, D-fx, D-Show, DAE, Digi 002, Digi002 Rack, DigiBase, DigiDelivery, Digidesign, Digidesign Audio Engine, Digidesign Intelligent Noise Reduction, Digidesign TDM Bus, DigiDrive, DigiRack, DigiTest, DigiTranslator, DINR, DV Toolkit, EditPack, Impact, Interplay, M-Audio, MachineControl, Maxim, Mbox, MediaComposer, MIDI I/O, MIX, MultiShell, OMF, OMF Interchange, PRE, ProControl, Pro Tools M-Powered, ProTools, ProTools|HD, ProTools LE, QuickPunch, Reel Tape, Reso, Reverb One, ReVibe, RTAS, Smack!, SoundReplacer, Sound Designer II, Strike, Structure, SYNC HD, SYNC I/O, Synchronic, TL Space, Velvet, and X-Form are trademarks or registered trademarks of Digidesign and/or Avid Technology, Inc. All other trademarks are the property of their respective owners.Product features, specifications, system requirements, and availability are subject to change without notice.PN 9106-5 84 05-00 REV A 10/07Comments or suggestions regarding our documentation?email: techpubs@digidesign.com Warning This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. Communications & Safety Regulation Information Compliance Statement The model 192 I/O complies with the following standards regulating interference and EMC:ãFCC Part 15 Class AãEN55103 – 1, environment E4ãEN55103 – 2, environment E4ãAS/NZS 3548 Class A Radio and Television Interference This equipment has been tested and found to comply with thelimits for a Class A digital device, pursuant to Part 15 of theFCC Rules. Communications Statement This equipment has been tested to comply with the limits for aClass A digital device. Changes or modifications to this 192I/O not authorized by Digidesign, Inc., could void the Certification and negate your authority to operate the 192I/O. This 192I/O was tested for CISPR compliance under conditions that included the use of peripheral devices and shielded cables and connectors between system components. Digidesign recommends the use of shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. Safety Statement This equipment has been tested to comply with USA and Canadian safety certification in accordance with the specifications of UL Standards; UL1419 and Canadian CSA standard; CSA C22.2 No.1-M90. Digidesign Inc., has been authorized to apply the appropriate UL & CUL mark on its compliant equipment.  Important Safety Instructions When using electric or electronic equipment, basic precautionsshould always be followed, including the following:ãRead all instructions before using this equipment.ãTo avoid the risk of shock, keep this equipment away from rain water, and other moisture. Do not use this equipment if it is wet.ãThe equipment should only be connected to the correct rating power supply as indicated on the 192I/O.ãDo not attempt to service the equipment. There are no user-serviceable parts inside. Please refer all servicing to authorized Digidesign personnel.ãAny attempt to service the equipment will expose you to a risk of electric shock, and will void the manufacturer’s warranty. Warning! ãHD audio interfaces need room at their sides to maintain proper air flow and cooling. ãDo not install these units into a rack or other enclosure that doesn't leave room on either side for the unit fans. ãDo not block the sides of the units (where fans are), or disconnect the fan. ãIf the units are racked up in a case, remove all lids, doors, or covers before operating the units. ãFailure to do so can result in the units overheating very quickly, which can permanently damage them. Disposal of Waste Equipment by Users in the European Union This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the produ
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks