of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report

Articles & News Stories


Views: 0 | Pages: 2

Extension: PDF | Download: 0

  REPLACEMENT OF BEARING IF NECESSARY, REPLACE INPUT GEAR BEARING (a) Using snap ring pliers, remove the snap ring. COMPONENT PARTSInput Gear COMPONENTS (b) Using SST and a press, remove the bearing.SST 09950–00020(c) Using SST, press in a new bearing.SST 09316–60010 (09316–00070)  –  TRANSFER Component Parts (Input Gear) TF–13  INSPECTION OF HUB SLEEVE AND SHIFTFORK MEASURE CLEARANCE OF SHIFT FORK AND HUB SLEEVE Using a feeler gauge, measure the clearance between thehub sleeve and shift fork. Maximum clearance: 1.0 mm (0.039 in.) If the clearance exceeds the limit, replace the shift fork orhub sleeve.(d) Select a snap ring that will allow minimum axial playand install it on the shaft. Maximum play: 0.15 mm (0.0059 in.) Thicknessmm (in.)Mark  –  TRANSFER Component Parts (Input Gear) TF–14
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks